Fuses And Circuit Breakers; Recommendation Of Fuses And Circuit Breakers; Electrical Wiring; Wiring Schematic - Danfoss VLT Compressor Drive CDS 803 Guia De Funcionamiento

VLT® Compressor Drive CDS 803
Operating Guide
Power [kW (hp)]
H4 IP20 6.0–7.5 (8.0–
10)
H5 IP20 10 (15)
H6 IP20 –

3.2.2 Fuses and Circuit Breakers

Fuses and circuit breakers ensure that possible damage to the drive is limited to damage inside the unit. Danfoss recommends fuses
on the supply side as protection. For further information, see the application note Fuses and Circuit Breakers found on
foss.com under Service and support/Documentation/Manuals & guides.
Use of fuses on the supply side is mandatory for IEC 60364 (CE) and NEC 2009 (UL) compliant installations.

3.2.2.1 Recommendation of Fuses and Circuit Breakers

Table 5: Fuses and Circuit Breakers
Circuit breakers
UL
Power [kW (hp)]
3x200–240 V
6.0 (8.0)
7.5 (10) –
10 (15)
3x380–480 V
6.0 (8.0)
7.5 (10)
10 (15)
–
18.5 (25)
22 (30)
30 (40)
Circuit breakers have not been evaluated by Danfoss as part of the certification process.
1

3.2.3 Electrical Wiring

3.2.3.1 Wiring Schematic

Danfoss A/S © 2021.06
10–15 (15–20)
18.5–22 (25–30)
30 (40)
N O T I C E
(1) Fuse
Non-UL UL
Bussmann
Type RK5
FRS-R-50
– FRS-R-50
FRS-R-80
FRS-R-25
FRS-R-25
FRS-R-50
–
–
Torque [Nm (in-lb)]
1.2 (11) 1.2 (11) 1.2 (11)
1.2 (11) 1.2 (11) 1.2 (11)
4.5 (40) 4.5 (40) –
Bussmann Bussmann
Type RK1 Type J
KTN-R50 JKS-50
KTN-R50 JKS-50
KTN-R80 JKS-80
KTS-R25 JKS-25
KTS-R25 JKS-25
KTS-R50 JKS-50
– –
AQ32174876762701-000301 / 130R0627 | 15
Installation
0.5 (4) 0.8 (7) 0.5 (4)
0.5 (4) 0.8 (7) 0.5 (4)
0.5 (4) 3 (27) 0.5 (4)
www.dan-
Non-UL
Bussmann Maximum fuse
Type T Type gG
JJN-50 gG-50
JJN-50 gG-50
JJN-80 gG-63
JJS-25 gG-25
JJS-25 gG-25
JJS-50 gG-50
JJS-80 gG-63
JJS-80 gG-63
JJS-125 gG-80