Commissioning; Programming Interfaces; Local Control Panel (Lcp) - Danfoss VLT Compressor Drive CDS 803 Guia De Funcionamiento

VLT® Compressor Drive CDS 803
Operating Guide

4 Commissioning

4.1 Programming Interfaces

The drive can be programmed in 3 different ways:
• Locally via the LCP.
• Externally via the RS485 interface by either
- using Modbus RTU
- or by installing VLT® Motion Control Tool MCT 10.
For the full menu and parameter specifications, refer to the VLT® Compressor Drive CDS 803 Programming Guide listed in
ditional Resources.

4.2 Local Control Panel (LCP)

The LCP is divided into 4 functional sections.
• A. Display
• B. Menu key
• C. Navigation keys and indicator lights
• D. Operation keys and indicator lights
1
2
1-20 Motor Power
3
A
[5] 0.37kW - 0.5HP
Setup 1
4
Status
B Menu
6
Com.
C
10
On
7
Warn.
8
Alarm
9
Hand
D
On
13
Illustration 9: Local Control Panel (LCP)
A. Display
The LCD display is illuminated with 2 alphanumeric lines.
Table 7: Legend to Section A
1 Parameter number and name.
2 Parameter value.
26 | Danfoss A/S © 2021.06
5
Main
Quick
Menu
Menu
11
12
OK
11
11
Off Auto
Reset On
14 15
Table 7 describes the information that can be read from the display.
Commissioning
1.1.2 Ad-
AQ32174876762701-000301 / 130R0627