Publicidad
Variable suction control
Note: Once all attachments are in place, unwind a sufficient length of cable and insert
the plug into the wall outlet. A yellow mark on the power cord shows the ideal cable
lenghth. Do not pull the power cord beyond the red mark.
1. Insert the power plug into the wall outlet.
2. Press the power on/off button located the unit to turn the vacuum cleaner "on".
3. To rewind the power cord, press the cord rewind button with one hand and guide the
power cord with the other hand to ensure that it dose not whip causing damage or injury.
4. To adjust the suction, slide the speed control button on the suction hand to control the
suction power of the vacuum cleaner.
Change dust bag.
1. Open the front cover.
2. Change dust bag.
1
Carry and move away the cleaner:
Note: This cleaner have a special feature for handle.
There is a handle on the top. In addition, another carry-
handle is in front. You can use it to conveniently carry
the cleaner when the cleaner is in vertical
Removing & cleaning pre-motor filter and air outlet filter
Warning: Always unplug the unit from electrical outlet before getting out the dust barrel.
USE AND FUNCTION
On /Off button or speed
control button
Rewind button
- 10 -
2
Publicidad
