Harbor Breeze GRACE BAY BDB52LW5LS Manual De Instrucciones página 10

CLOSEMOUNT-STYLE FAN MOUNTNG
1.
Remove preassembled canopy cover from bottom
of canopy (B). NOTE: It may be necessary to use
a screwdriver (not included) to remove the canopy
cover by tapping on the canopy cover from the
inside of the canopy (B).
NOTE: The downrod (A) and canopy cover are
not used in this type of installation.
2. Remove every other preassembled screw and lock
washer from top of motor housing (D).
3. Pull wires up through hole in the middle of the
canopy (B) and attach canopy (B) to motor
housing (D) using the three previously removed
screws and lock washers.
1
2
Screw
Lock Washer
D
3
Screw
Lock
Washer
D
10
B
Canopy
Cover
B