Loading The Battery - Polaroid CSA-00302S Manual De Usuario

Loading the battery

Please use two AAA batteries.
1. Loosen the 2 screws and remove the battery/card compartment
cover as indicated.
2. Load the batteries into the battery compartment with + and - ends
correctly installed.
3. Re-install the cover.
Inserting the SD/MMC card (optional)
1. Loosen the 2 screws and remove the battery/card compartment
cover.
2. Insert the card as shown in the illustration until it reaches the end
of the slot.
3. When using a SD card, the camera's built-in memory will become
inaccessible.
4. To remove the SD card, gently push the card until it pops up.
5. Re-install the cover.

2
2
1
1