Payout Motor Test; Sound Test - NAMCO bee panic Manual Del Operador

7-2-5

Payout Motor Test

This Test allows the checking of the Payout Motors and Payout Sensors.
To discontinue this test and step to the next test press the Select switch.
While this Test is selected, the Selection switches 1 and 2 and the Challenge
•
switch are illuminated.
Press one of the Selection switches or the Challenge switch. The lamp of the
•
selected switch will turn off, and the Payout Motor of the selected unit will
operate. Press the switch again to turn the Motor off.
When a payout Sensor is activated a white Target Assy lamp will illuminate for one
second.
For Payout Assy 1, the white lamp on Target Assy 1 illuminates
For Payout Assy 2, the white lamp on Target Assy 2 illuminates
For Payout Assy 3, the white lamp on Target Assy 3 illuminates
7-2-6

Sound Test

This Test allows the checking of the Sounds.
To discontinue this test and step to the next test press the Select switch.
While this Test is selected, the Selection switches 1 and 2 are illuminated, and
•
the 7-segment display of Target Assy 3 shows "00".
Press Selection switches 1 or 2 to change the number up or down.
•
• When the trigger of the Gun is operated, the sound associated with the displayed
number is produced, and the display flashes. (To turn the sound off, pull the
trigger again). The display will stop flashing when the sound ends.
No sound is produced from numbers 9, 10, 11, 15, 16, 22, 36 and 38, but this
•
does denote a malfunction.
( )
c c c c c
(se)
Page 47