Heating Operation - Hitachi SPX-RCK5 Manual Del Usuario

Mando a distancia con cable
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42

HEATING OPERATION

Use the device for heating when the outdoor temperature is under 21°C.
When it is too warm (over 21°C), the heating function may not work in order to protect the device.
In order to keep reliability of the device, please use this device above -15°C of the outdoor temperature.
All manuals and user guides at all-guides.com
Press the FUNCTION selector so that the display indicates
1
(HEAT).
Set the desired FAN SPEED with the
(the display indicates the setting).
(AUTO) : The fan speed is HI at first and varies
2
(HI)
(MED)
(LOW)
(SILENT) : Fan speed ultra slower.
Set the desired room temperature with the TEMPERATURE
buttons (the display indicates the setting).
3
The temperature setting and the actual room temperature may
vary somewhat depending on conditions.
Press the
(START/STOP) button. Heating operation starts
START
with a beep. Press the button again to stop operation.
STOP
■ As the settings are stored in memory in the remote controller, you only
have to press the
– 5 –
(FAN SPEED) button
to MED automatically when the preset
temperature has been reached.
: Economical as the room will become warm
quickly.
But you may feel a chill at the beginning.
: Fan speed slow.
: Fan speed slower.
(START/STOP) button next time.

Publicidad

Tabla de contenido
loading

Tabla de contenido