Operation; Description Of The Indoor Units Table - Hitachi CSNET WEB Manual De Instalación Y Funcionamiento

CSNET WEB
Installation & Operation Manual

7. Operation

Once the initial configuration is complete, you can proceed to use CSNET WEB
7.1. Description of the Indoor Units
Table
The Indoor Units Table has one row for each indoor unit; the
columns contain the following information:
- OU: Address of the Outdoor Unit or Refrigerant Circuit.
- IU: Address of the Indoor Unit.
- RCS: Number of the Remote Controller (if it is used by more
than one unit).
- Location: Name of the room that is conditioned by the
selected unit.
- Area: Area which the selected indoor unit belongs to
- On/Off: Indicates if the indoor unit is On
- Control: Indicates if any control parameter of the Indoor Unit
is locked, so that the Remote Controller cannot modify it:
Indicates that some parameter has been locked at
the Remote Controller.
Page 15
or Off .
PMML0163A-rev.0 - 03/2008
indicates that all the parameters can be modified
from the Remote Controller.
- Tset: Setpoint Temperature.
- Mode: Operation mode of the indoor unit:
Cool, Dry , Fan
- Fan: Indoor unit fan operation level: Low
High ,
- Lower: Position of the louver:
(the symbol indicates that the louver is not available).
- Timer: Timer used by this indoor unit
, Heat , Auto .
, Med
... ...
,