Canopy Installation - Faro Barcelona THIRA Manual De Instrucciones

INSTRUCCIONES DE SEGURIDAD / INSTRUCTION DE SÉCURITÉ / SAFETY INSTRUCTIONS / INSTRUÇÕES DE SEGURANÇA / SICHERHEITSHINWEISE /
VEILIGHEIDSINSTURCTIES / INSTRUZIONI DI SICUREZZA / ΟΔΗΓΊΕΣ ΑΣΦΑΛΕΊΑΣ / ИНСТРУКЦИИ ПО ТЕХНИКЕ

CANOPY INSTALLATION

Attach canopy to mounting bracket via. 2 set screws (1 for each side and pre-insert on mounting bracket) an fasten them firmly.
INSTALL THE BLADE AND LIGHT KIT
1.Potition the blade bracket under the blade, secure with screws and metal or fiber washers. Do not tighten screws until each screw
has been started, then tighten each screw starting with center screw..
2.Insert remainging screws, repeat with remainging blades, securely tighten all screws.
3.Remove one screw from the mounting plate, and loosen the rest two.
4.Remove the three screws of switch housing cover from the light kit assembly, and remove the switch housing cover, place it on
the mounting plate ,the holes are keyholes, align it and make sure it fit well, and tighten it with the removed one screw from
mounting plate.
5.Engage the light kit connector with motor connector.
6.Position the light kit assembly on the switch housing cover,tighten the light kit with the removed screws from switch housing cover
7.Loosen the screws on the fitter of the light kit, and position the glass into the fitter, and tighten the screws by hand, make sure you
are not tightening the glass to tighly, it may cause the glass broken.
8.Assemble the rest glass as the above process.
MAINTENANCE
1. As fans tend to move during operation, some connections may loosen. Check the supporting screws, brackets and blade
attachments twice a year to ensure that they are secure.
2. Cleaning the fan helps to maintain its appearance for years. Do not use water when cleaning. This could damage the motor or
the blades and could cause electrocution.
3. Use a soft brush or lint-free cloth to prevent scratching the surface.
4. There is no need to oil the motor as the bearings are permanently lubricat
Thira – ref. 33128
faro
- 19