Maintenance; Light Bulb Replacement - Dimplex DF2010-EU Manual Del Proprietário

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60

Maintenance

WARNING: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.

Light Bulb Replacement

Allow at least five (5) minutes for
light bulbs and heater to cool off
before touching bulbs to avoid
accidental burning of skin.
Light bulbs need to be replaced
when you notice a dark section
of the flame or when the clarity
and detail of the log exterior
disappears. There are two (2)
bulbs under the log set which
generate the flames and embers.
Bulb Requirements
Quantity of two (2) clear chande-
lier or candelabra bulbs with an
E-14 socket base, 60 watt rating.
Helpful Hints
It is a good idea to replace all
light bulbs at one time if they are
close to the end of their rated life.
Group replacement will reduce
the number of times you need
to open the unit to replace light
bulbs.
10
To Replace The Light Bulbs
(Figure 6)
1.
Unplug the unit from power
outlet.
2.
On the back of the Compact
Fireplace remove the screws
from the light access cover.
3.
Remove the light access
cover.
4.
Reach into the opening,locate
and examine the bulbs to
determine which bulb(s)
require replacement.
5.
Unscrew the bulb(s) counter-
clockwise.
6.
Insert new bulb(s).
7.
Install the light access cover
and install the
screws.
Figure 6
Light Bulbs
Screws
www.dimplex.com
Light Access
Cover

Publicidad

Tabla de contenido
loading

Tabla de contenido