Omron MicroAIR U100 Manual De Instrucciones página 21

How to clean the unit after each inhalation
6. Follow the below instructions to clean all parts.
• Mesh Cap
Wash the mesh cap in mild (neutral) detergent, then rinse off
with clean water. Remove excess water and allow to air dry in
a clean place.
Some types of medications can easily remain on the mesh,
therefore pay close attention during washing.
Do not wash under running water.
EN
• Medication Container, Mouthpiece, Mask and
Mask adapter
Wash them in water and mild (neutral) detergent.
Rinse them thoroughly with clean tap water and allow
to air dry in a clean place.
• Vibrating element and its surrounding
Wash with running water.
Note: Make sure the battery cover is installed to
prevent liquid entering the device.
• Main Unit
Clean the main unit by wiping it off with a (moistened) lint free cloth.
Use a dry lint free cloth to wipe the main unit dry.
Never clean with benzene or thinner.
21