Using The Ac Adapter (Optional) - Omron MicroAIR U100 Manual De Instrucciones

Using the AC adapter (Optional)

Caution: Use only the original AC adapter as indicated in
section "Optional Medical Accessories".
To connect the AC adapter to the main unit
(1) Remove the battery cover and remove the
batteries, see page 12.
(2) Place the main unit on the AC adapter connection
stand as shown in the illustration on the right.
Note: It will click and lock to the stand.
(3) Insert the AC adapter power plug into an outlet.
Caution: Never plug or unplug the AC adapter with wet hands.
Note: Do not place the device in a location where it is difficult to
disconnect the AC adapter.
To remove the AC adapter from the main unit
(4) Disconnect the AC adapter power plug from the
outlet.
(5) Push on both sides of the connection stand to
unlock from the main unit.
(6) Remove the main unit.
(2)
(3)
Connection is completed.
(6) Remove
(4) Unplug
(5) Push both ends
EN
13