GM GMT245 Instrucciones De Montaje

GMT245 Underhood Lamp Kit
Included in the kit:
Underhood lamp assembly
Underhood lamp wiring harness
Underhood rivet (Qty: 2)
Required tools:
Rivet tool
Flat-bladed metal pry tool
Installation Instructions:
1. Remove hood insulator retainers (1) (Qty: 14) from
underhood blanket (2). Figure 1.
2. Position underhood lamp assembly to hood (4).
3 Rivet the underhood lamp assembly to hood (3).
FIGURE 1
4. Connect underhood lamp harness connector to underhood
lamp assembly.
5. Install underhood lamp wiring harness retainers to vehicle.
Figure 2.
GMT245 Underhood Lamp Kit
ALL INFORMATION WITHIN ABOVE
DATE
BORDER TO BE PRINTED EX-
ACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GMSPO SPECIFICATIONS.
REVISION
30JN06
FIGURE 2
HOOD HINGE
RETAINERS
(UNDERHOOD
LAMP HARNESS)
6. Remove connector plug from inline to forward lamp connec-
tor. Figure 3.
FIGURE 3
BAFFLE
7. Connect the underhood lamp wiring harness to the forward
lamp wiring harness.
8. Install hood insulator with retainers. (Qty: 14)
IR 30JN06
PART NO.
INSTALLATION INSTRUCTIONS
AUTH DR
TITLE
GMT245 Underhood Lamp Kit
PART NO.
19165568
6200 Grand Pointe Dr., Grand Blanc, MI 48439
UNDERHOOD LAMP
FRT
HOOD ASSEMBLY
RETAINER
(UNDERHOOD LAMP
HARNESS)
UNDERHOOD
LAMP JUMPER
TEMPERATURE
CONNECTOR WITH
RETAINER
(FORWARD LAMP
HARNESS)
19165568
SHEET
1
SHEET
OUTSIDE AIR
SENSOR
1 3
OF
3
OF