bosal 7-pin Manual De Instrucciones página 4

6. Draw the end of the cable set marked with R, along the cable set at the car side, to the right rear light.
a) Disconnect the 6-item plug-connection inside the vehicle from the right rear light and connect it with the
matching element of the cable set.
b) Connect the remaining housing of the cable set to the right rear parking light.
7. Draw the end of the cable set marked with L, along the cable set at the car side, to the left rear light.
a) Disconnect the 6-item plug connection inside the vehicle from the left rear light and connect it with the matching
element of the cable set.
b) Connect the remaining housing of the cable set to the left rear parking light.
8. Connect the brown cables with a proper earthing point; (or to the earthing point at the vehicle side, or fasten with
the metal-sheet screw supplied).
Cut the cable, inside the vehicle with the fog light function, in an easily-accessible place, remove the insulation at
9.
the cable ends up to approx. 5 mm. At the end of the cable from the fog light switch, tighten a cap and insert it into
the cap housing. At the end of the cable leading to the rear fog light, tighten the end and insert it into the end
housing. Connect both plugs with proper elements of the grey and grey/white cables in the cable set.
10. Trailer power supply:
Only for 13-polar version. 3-input housing (red/blue, yellow and white/brown leads) is provided for expanded
socket functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the
following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
part no. 014-169
part no. 015-069