Selecting The Display Period Of The Images; Autoimage - Sony CDX-M3DI Manual De Instrucciones

Adjusting the character color
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press (GRAPHIC).
3
Press < or , repeatedly to select
"Color Sel," then press (ENTER).
Each time you press < or ,, the item
changes as follows:
AutoClear y BlendLevel y
Plaque y Color Sel y
AutoImage y AutoClear
4
Press (ENTER).
5
Press M or m to select "Custom," then
press (ENTER).
6
Press M or m repeatedly to select one
among Red-Green-Blue.
Each time you press M or m, the item
changes.
7
Press < or , to adjust the level of
the color.
Repeat steps 7 and 8 to set the character
display to your desired color.
8
Press (ENTER).
9
Press M or m to select "Save," then
press (ENTER).
To return to the former character color, select
"Cancel," then press (ENTER).
To restore the factory-set character color,
select "Reset," then press (ENTER).
10
Press (GRAPHIC).
The display returns to the normal display.
Selecting the display period
of the images

— AutoImage

The pre-stored images switch in sequence
automatically. You can select the display period
for an image.
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press (GRAPHIC).
3
Press < or , repeatedly to select
"AutoImage."
Each time you press < or ,, the item
changes as follows:
AutoClear y BlendLevel y
Plaque y Color Sel y
AutoImage y AutoClear
4
Press (ENTER).
5
Press (ENTER).
6
Press M or m repeatedly to select the
display period for an image.
Each time you press M or m, the item changes
as follows:
Middle y Fast y OFF y Slow y
Middle
To cancel the Slide Show function, select
"OFF."
7
Press (ENTER).
8
Press (GRAPHIC).
The display returns to the normal display.
23