Using The Rotary Commander (Optional) - Sony CDX-C5000RX Manual De Instrucciones

Using the rotary
commander (optional)
The rotary commander works by pressing
buttons and/or rotating controls.
You can also control an optional CD/MD unit
with the rotary commander.
By pressing buttons
(the SOURCE and MODE buttons)
(SOURCE)
Each time you press (SOURCE), the
source changes as follows:
Tuner t CD t MD*
* If the corresponding optional equipment is
not connected, this item will not appear.
Pressing (MODE) changes the operation
in the following ways:
• Tuner: FM1 t FM2 t FM3 t MW t LW
• CD unit*: CD1 t CD2 t ...
• MD unit*: MD1 t MD2 t ...
* If the corresponding optional equipment is
not connected, these items will not appear.
22
By rotating the control
(the SEEK/AMS control)
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
•Tune in stations automatically. Rotate and
(MODE)
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations memorised on the
•Change the disc.
and hold the control until you locate the
specific point in a track, then release it to
start playback.
hold the control to find a specific station.
number buttons.