Adjusting The Sound Characteristics; Attenuating The Sound - Sony CDX-4170R Manual De Instrucciones

Other operations
Rotate the VOL control to
adjust the volume.
Press (SEL) to adjust and select.
Press (DSPL) to change the
displayed items.
Changing the operative direction
The operative direction of controls is factory-
set as in the illustration below.
To increase
To decrease
If you need to mount the rotary commander on
the right side of the steering column, you can
reverse the operative direction.
Press (SEL) for two seconds while
pushing the VOL control.
Press (ATT) to
attenuate the
sound.
Press (OFF) to turn
off the unit.
Adjusting the sound
characteristics
You can adjust the bass, treble, balance and
fader. Each source can store the bass and treble
level settings independently.
1
Select the item you want to adjust by
pressing (SEL) repeatedly.
VOL (volume) n BAS (bass) n
TRE (treble) n BAL (left–right) n
FAD (front–rear)
2
Adjust the selected item by pressing (+)
or (–).
Adjust within three seconds after selecting
the item. (After three seconds, the buttons
work as volume control buttons.)

Attenuating the sound

Press (ATT).
"ATT" flashes.
To restore the previous volume level, press
(ATT) again.
EN
15