Setting The Clock Automatically - Sony CDX-4170R Manual De Instrucciones

Ocultar thumbs Ver también para CDX-4170R:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Note
You cannot use this function in some countries
where no PTY (Programme Type selection) data is
available.
1
Press (PTY) during FM reception until
"PTY" appears.
PT
I N F O
The current programme type name appears
if the station is transmitting PTY data.
"- - - - -" appears if the received station is
not an RDS station, or if the RDS data has
not been received.
2
Press (PTY) repeatedly until the desired
programme type appears.
The programme types appear in the order
shown in the above table. Note that you
cannot select "NONE" (Not specified) for
searching.
PT
S P O R T
3
Press either side of (SEEK/AMS).
The unit starts searching for a station
broadcasting the selected programme type.
When the unit finds the programme, the
programme type appears again for five
seconds.
"NO" and the programme type appear
alternately for five seconds if the unit
cannot find the programme type. It then
returns to the previous station.
Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
During FM reception, press (2) while
pressing (SEL).
"CT" is displayed, and the clock is set.
FM1
1 0 0
CT
To cancel the CT function
Repeat the above procedure.
Notes
• The CT function may not work even though an
RDS station is being received.
• There might be a difference between the time
set by the CT function and the actual time.
EN
13

Publicidad

Tabla de contenido
loading

Tabla de contenido