3
Select a "V Drive" box for registration by
adjusting the SEEK/AMS control either
on the unit or the rotary commander.
Tip
If you select an already registered box number,
the registered source will be played or tuned in
to.
Registering a vocal phrase
1
Once all the steps of "Selecting a "V
Drive" box for registration" are
completed, press (TALK) on the rotary
commander .
2
After you hear the unit's vocalised
instruction "Please speak now.",
pronounce a desired phrase toward the
supplied microphone.
Please
speak
now.
3
After the vocalised instruction "Please
repeat.", pronounce the same phrase
again.
Please
repeat.
4
After another vocalised instruction
"Please repeat.", pronounce the same
phrase one more time.
Please
repeat.
SONY
H I TS
SONY
H I TS
SONY
H I TS
The unit records the vocal phrase in this step
in order to identify the registered phrase later.
When the unit answers "OK!", the registration
is completed.
Notes
• Do not attempt to register while driving, as this
may create a traffic hazard.
• Be sure to reply after the unit's vocalised
instruction.
• When a beep sound is heard, the registration
failed. In this case, repeat the same process
starting from step 1.
• Do not use phrases of similar pronunciation such
as "Sony POPS 1" and "Sony POPS 2", because
the unit may not be able to distinguish the
difference.
• After you hear the unit's vocalised instruction,
reply within three seconds.
Tips
• When you register the phrases, pronounce them
clearly and loudly to make it easier for the unit
to recognise them.
• Registration should be made while the car is
parked with the engine running so that the unit
will recognise your voice more easily when you
are driving.
• Though the vocalised instructions are in English,
any language can be used for registration.
• The volume of the vocalised instructions can be
adjusted on the unit or by the rotary
commander.
GB
21