geberit AquaClean Manual Del Usuario página 11

The wall-mounted control panel is without function
The following table will help you with troubleshooting if:
• the wall-mounted control panel is not functioning.
• the shower toilet cannot be controlled with the wall-mounted control panel.
Should the remote control fail to function, you can use the lateral control panel instead.
Description of problem
LED display flashed red.
Touch-sensitive surface
does not respond when
touched.
LED display flashes red
twice, followed by a short
break.
5883451531-1 © 03-2019
967.376.00.0(01)
Cause
Batteries flat
Malfunction has
occurred
Pairing unsuccessful
User interface
inactive
Fault clearance
▶ Replace the batteries.
→ See "Replace the battery",
page 10.
▶ Check batteries in the wall-mounted
control panel.
▶ Check mains connection to the
shower toilet.
▶ Re-assign wall-mounted control
panel.
→ See "Assigning to the wall-
mounted control panel", page 6.
▶ Re-assign wall-mounted control
panel.
→ See "Assigning to the wall-
mounted control panel", page 6.
EN
11