Siemens ECHOMAX xps Manual De Instrucciones página 114

For Canadian Hazardous Installation Only
APPLICABLE TO CANADIAN INSTALLATIONS IN HAZARDOUS LOCATIONS ONLY.
NOTES :
1) THE TRANSDUCER CABLE MUST BE TERMINATED IN AN AREA EXTERNAL
TO HAZARDOUS LOCATIONS, CLASS I & II GR. A,B,C,D,E,F,G
2) A SEAL SHALL BE INSTALLED WITHIN 50 mm OF THE TRANSDUCER CONDUIT HUB
FOR CLASS I, DIV. 1 HAZARDOUS LOCATION ONLY..
3) INSTALLATION SHALL BE DONE IN ACCORDANCE WITH CEC
PART 1 REQUIREMENTS.
DRAWING SCALE
TOLERANCES UNLESS OTHERWISE NOTED
NONE
1 PLACE DECIMAL
2 PLACE DECIMAL
DRAWN BY
3 PLACE DECIMAL
B. GRAY
TITLE
CHECKED BY
S. NGUYEN
APPROVED BY
T. VU
See Siemens Milltronics drawing number 0-8850004Z-DI-A for current drawing status.
Page EN-12 XPS/XCT Series Transducers – OPERATION MANUAL
THIRD ANGLE PROJECTION
±0.030" FRACTIONS ±0.030"
±0.010" ANGLES ±0.5°
±0.002"
XPS / XCT TRANSDUCER SERIES
INTERCONNECTION DIAGRAM
THIS DOCUMENT REMAINS THE PROPERTY OF MILLTRONICS AND IS
SUBJECT TO RECALL. IT MAY NOT BE COPIED, AND IS ISSUED
AND CAN BE UTILIZED ONLY FOR SUCH LIMITED PURPOSES AS MAY
SPECIFICALLY HAVE BEEN AUTHORIZED BY MILLTRONICS. IT IS
TO BE MAINTAINED CONFIDENTIAL, SINCE IT MAY CONTAIN
PROPRIETARY INFORMATION AND TRADE SECRETS OF MILLTRONICS
OR OTHERS. THE ITEMS DEPICTED MAY THEMSELVES BE THE
SUBJECT OF PATENTS, INDUSTRIAL DESIGN REGISTRATIONS OR
COPYRIGHTS OF MILLTRONICS OR OTHERS, AND THE ISSUE OF THIS
DRAWING DOES NOT IMPLY ANY LICENSE UNDER ANY SUCH RIGHTS.
COPYRIGHT MILLTRONICS
ALL RIGHTS RESERVED
2
ADDED CLASS I, DIV I HAZ. LOCATION ONLY TO
NOTE 2 PER ECN #98-885-0-0011
ADDED CAN. INST'L STATEMENT
1
PER ECN #96-000-0-M028
0
FOR ISSUE
No. REVISION DESCRIPTION
PETERBOROUGH, ONTARIO, CANADA.
DRAWING No.
00027002
FILE No.
0-8850004Z-DI-A
1:1
PLOT AT
IMPORTANT NOTICE
AUG
RPC SN
12/98
AUG
BG ALC
08/96
APR
BG TV
01/96
DWG BY DATE
APPRO.
REV
2
1 1
SHEET OF
7ML19985QM82