«Aqua Prima» Water Filter - Saeco Talea Touch Manual De Uso Y Mantenimiento

«AQUA PRIMA» WATER FILTER
To improve the quality of the water you use, and extend the life of your machine at the same time, it is
must be replaced.
1
Remove the „Aqua Prima" water
date of the current month.
4
Place a container beneath the hot
water spout.
7
on off
reload water
Fill the water tank if necessary.
2
Press down until it clicks into place.
5
1.2 machine settings
alerts and
language &
acoustic
display
settings
cup-warming
water
surface settings
Access programming (see page
18 and 19). Press "water settings".
8
Have you replaced the old water
Press the
3
Fill the tank with fresh drinking
the full tank for 30 minutes for a
correct initialization.
6
1.2.4 water settings
rinse
on 39
water
hardness
3/4
9
Turn the knob until the
position is reached. Water
dispensing begins.
7
).