Using Balance Adjustment; Using The Equalizer; Recalling Equalizer Curves - Pioneer Super Tuner III D KEH-P7035 Manual De Instrucciones

Section
Audio Adjustments
07
! If you switch the SFEQ setting, the HPF func-
tion is automatically turned off. By turning the
HPF function on after selecting the SFEQ set-
ting, you can combine HPF function with
SFEQ function.

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select Fad.
Press AUDIO until Fad appears in the display.
# If the balance setting has been previously ad-
justed, Bal will be displayed.
2 Press a or b to adjust front/rear speak-
er balance.
Each press of a or b moves the front/rear
speaker balance towards the front or the rear.
Fad F15  Fad R15 is displayed as the front/
rear speaker balance moves from front to rear.
# Fad F/R 0 is the proper setting when only two
speakers are used.
# When the rear output setting is Rear SP :S.W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 31.
3 Press c or d to adjust left/right speaker
balance.
When you press c or d, Bal R/L 0 is dis-
played. Each press of c or d moves the left/
right speaker balance towards the left or the
right.
Bal L 9  Bal R 9 is displayed as the left/right
speaker balance moves from left to right.
24
En
HHHHHHHHHHHHHH

Using the equalizer

The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.

Recalling equalizer curves

There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
SUPER BASS
POWERFUL
NATURAL
VOCAL
CUSTOM1
CUSTOM2
FLAT
! CUSTOM1 and CUSTOM2 are adjusted
equalizer curves.
! A separate CUSTOM1 curve can be cre-
ated for each source. (The CD player and
the multi-CD player are set to the same
equalizer adjustment setting automati-
cally.) If you make adjustments when a
curve other than CUSTOM2 is selected, the
equalizer curve settings will be memorized
in CUSTOM1.
! A CUSTOM2 curve can be created com-
mon to all sources.
! If you make adjustments when the
CUSTOM2 curve is selected, the
CUSTOM2 curve is updated.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
Equalizer curve
Super bass
Powerful
Natural
Vocal
Custom 1
Custom 2
Flat