Installing Partition Grille 5N0 017 221 - Volkswagen 5N0 017 221 Instrucciones De Montaje

3

Installing partition grille 5N0 017 221

Required special tools, testers, measuring instruments and aux‐
iliary items
♦ Knife/cutter
♦ Tape measure
♦ Saw
♦ Paint stick
♦ Abrasive cloth/paper
Note
We recommend that the installation be carried out with the assis‐
tance of a second person.
– Remove luggage compartment cover.
– Remove variable height load flooring, if fitted.
– Remove plastic tray, if fitted.
– Fold rear seat bench forwards.
– Insert plastic caps -5- in the open ends of the tubes of the
partition grille -1-.
– Push the rubber fittings -3- into the respective central hole on
left and right sides of the partition grille -3-.
– Press the rubber fittings -3- into the holes of the left support
strut -7-.
Note
The installation of the rubber fittings -3- on the right support strut
-2- is performed in the same manner.
4
3. Installing partition grille 5N0 017 221
Volkswagen Accessories