Installing Partition Grille 5N0 017 222 - Volkswagen 5N0 017 221 Instrucciones De Montaje

4

Installing partition grille 5N0 017 222

– Remove luggage compartment cover.
– Fold rear seat bench forwards.
– Move the partition grille -10- into installation position.
Note
The contour of the lower partition grille -10- is a trapeze shape,
the larger dimension (-dimension b- and -dimension a-) faces up‐
wards.
– Lightly tighten the two M8x20 star head bolts -11-.
– The securing of the partition grille -10- on the right side is per‐
formed in the same manner.
– Tighten the two M8x20 star head bolts -11- on both sides of
the partition grille.
– Fold the rear seat backrest back and lock in position.
– Install luggage compartment cover.
Note
♦ After a short drive, check all screw fastenings and retighten as
necessary.
♦ After an adequate period, check all screw fastenings again.
WARNING!
♦ The transportation of people behind the partition grille is
forbidden!
♦ The head restraints must always be set correctly according
to the head height of the seat occupant.
♦ Always secure heavy loads with a securing strap.
8
4. Installing partition grille 5N0 017 222
Volkswagen Accessories