Descargar Imprimir esta página

CASUALPLAY MULTI FIX Manual De Instrucciones página 17

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
handbook), depending on the category of child seat and of the fixture.
3. The mass group and the ISOFIX size class for which this device in intended is: 9 - 18 kg
and Class B1.
WARNING
1. The category of this child restraint system is "SEMIUNIVERSAL" and it is suitable for
installation in the vehicles and in the seat positions indicated in the vehicle list inside this
packaging.
2. Other vehicles and seat positions may also be suitable for this restraint system.
3. If in doubt, consult the manufacturer or retailer.
IMPORTANT
This product is only suitable for use in the approved vehicles that are fitted with threepoint
seat belts with a retractor, approved under UN/ECE nº 16 or other equivalent standards.
Instructions for use
Adjusting the harness
• To loosen the harness before seating the child in the seat, keep the harness adjustment
button pressed down while you pull both shoulder straps (not the chest protector pads)
(fig.01).
• Open the buckle by pressing the red button.
• Place the child in the seat and adjust the height of the headrest, to fit the height of the
straps to the height of the child's shoulders (fig.02).
• Fasten the buckle, by first bringing the two side parts together and then inserting them
into the buckle (fig.03).
• Lastly, adjust the harness to fit the child, by pulling the harness adjustment strap (fig.04).
Adjusting the headrest
• The headrest of the MULTI FIX has 3 positions, pull the adjustment handle and move the
headrest to the required position (fig.05).
• You can use the headrest to adjust the height of the harness, so that the harness is at the
height of the child's shoulders.
15

Publicidad

loading