Tabla de contenido
Publicidad
COOKING TIME SEMIAUTOMATIC OPERATION
It is recommended to set the duration of cooking.
Switch on the oven, then press and release the key
and up to 10h and 00m.
On the display the symbol A appears (automatic operation). After that, wait until the timer shows the current
hour and then select an available cooking function with the keys
The oven suggests a preset temperature for each function, which can be changed with the keys
The oven starts working for the set time; when this time has elapsed the oven automatically stops cooking.
you will hear a sound signal, while the temperature display and the cooking function display turn off, the timer
display shows the current hour and the symbols
To stop the sound and exit to the program, just press one of the following keys
Now the oven is ready to be programmed again; you can select a new cooking function or switch the oven off by
pressing and releasing the key
END OF COOKING SEMIAUTOMATIC OPERATION
It is recommended to set the end of cooking time
Switch on the oven, then press and release the
within the next 23h59m. Once you have done this, wait until the timer shows the current hour.
Then select an available cooking function with the
The oven will suggest a preset temperature, which can be changed by using the
.
The oven starts cooking and when fixed time has elapsed, it will automatically turn off.
At the end of the fixed cooking time, the oven beeps, the temperature display and the cooking function display
turn off, the timer display shows the current hour and the 2 symbols
To stop the oven beep or to cancel the program just push one of the following keys
Now the oven is ready to be programmed again; you can select a new cooking function or switch the oven off by
pressing and releasing the key
AUTOMATIC OPERATION
It is recommended to set the duration and the
Switch on the oven, then press and release the
Wait until the 2 dots on the timer display stop flashing and the timer shows the current hour. Then press the
key and set the end of cooking with the
Wait again for the 2 dots stop blinking and select an available cooking function.
The oven will suggest a preset temperature, which can be changed by using the keys
.
Once the dots have stopped blinking, the oven begins the delayed start mode: it will automatically start for the
requested duration and stop at the requested time.
When the oven is cooking, you see the selected temperature, the current hour and the selected function on the
corresponding displays. The internal oven light turns off.
However, both the temperature and the function can be changed by repeating the above mentioned instructions.
At the end of the program, the oven beeps, the temperature display and the cooking function display turn off,
the timer display shows the current hour and the 2 symbols
To stop the oven beep or to cancel the program just push one of the following keys
Now the oven is ready to be programmed again; you can select a new cooking function or switch the oven off
by pressing and releasing the key
AUTOMATIC AND SEMIAUTOMATIC COOKING RESTRICTIONS
The preheating (PRH) and defrosting functions are not compatible with the above mentioned automatic and
semiautomatic operation.
-After setting the preheating or the defrosting function, it is not possible to set either the duration or the end of
cooking.
-When programming the oven with the automatic operation, you cannot choose the preheating or the defrosting
function.
and set the desired time of cooking with the keys
and A blink.
.
key and set the end of cooking time with the
and
keys.
.
end of cooking
key and set the duration of cooking with the
and
key.
.
26
and
and
keys.
and A blink.
and
and A blink.
and
.
and
keys,
and
keys.
.
Publicidad
Tabla de contenido
