Suntec Wellness Klimatronic CoolBreeze 2500 TV Manual De Instrucciones página 7

ASSEMBLING SEQUENCE
1. Front guard
2. Blade
3. Blade knob
4. Blade screw
MOUNTING THE REAR GUARD.
Mount the Rear Guard on to the motor housing and secure it with the locking nut.
MOUNTING THE BLADE.
Insert the blade onto the motor shaft and tighten the blade with the blade cap.
MOUNTING THE FRONT GUARD
Hold the front guard to make sure that the Trade Mark is level and that the front guard are
centered over the rear guard. Then push all the safety clips firmly into place.
CAUTION
1. Do not plug the power cord into the wall outlet until the fan has been completely assembled.
2. Use power source according to the electric specifications in the rating label at the back of
switch box.
3. Never operate the fan with a cracked or damaged blade.
5. Rear guard
6. Motor housing
7. Oscillating control bar