Advanced Operations - AEG VCR 4505 Manual De Instrucciones

HG210ED(EN).fm Page 9 Tuesday, March 2, 2004 4:08 PM
Recording
Viewing and Recording the Same Programme
1) Insert a cassette tape with its erase-prevention tab in place.
(If necessary, rewind or fast forward the tape to the point
at which you want to begin recording.)
2) Press the
number buttons
the channel to be recorded.
3) Press
to select the tape speed (SP/LP).
SPEED/SYSTEM
4) Press
to begin recording.
REC/OTR
•The REC indicator on the VCR comes on.
5) Press
/ when recording is completed.
STOP
L
Skipping Unwanted Programme Material During
Recording
1) Press
when you want to temporarily halt
PAUSE/STILL
recording.
You can check the remaining pause time with
the TV screen. Each mark represents 1 minute. After 5
C
minutes, the VCR will automatically switch to the Stop
mode to prevent tape damage.
2) Press or
PAUSE/STILL REC/OTR

Advanced Operations

Counter Memory
This feature can be used to memorize a beginning point that
you want to watch again. Rewinding or fast forwarding makes
it easy to locate this point.
If a tape includes both programmes recorded in the
Note: •
PAL system and ones recorded with NTSC system,
this function may not be operated correctly.
TAPE COUNTER MEMORY does not function if
•
the Auto Repeat mode is set to ON. In this case, set
the Auto Repeat mode to OFF.
1) Stop the tape at the desired point.
2) Press
TAPE COUNTER RESET
3) Press
TAPE COUNTER MEMORY
the TV screen.
4) Press or /
REC/OTR PLAY
o
•Press / when recording or playback is completed.
STOP L
5) Press / or /
REW s F.FWD B
stop when the counter returns to 0:00:00 (approx.).
To Exit the Counter Memory
Press
TAPE COUNTER MEMORY
from the TV screen.
When you set the Auto Repeat mode to ON while the
Note:
Counter Memory mode is ON, the VCR exits the
Counter Memory mode automatically.
OTR (One Touch Recording)
This function enables you to set the duration of a recording
simply by pressing .
REC/OTR
1) Follow steps
to in "Viewing and Recording the Same
1) 3)
Programme" section.
2) Press
repeatedly until the desired recording
REC/OTR
length appears in the upper left corner of the TV screen.
I [0:30]
I I[1:00]...
(Normal (OTR:
recording) 30 minutes)
Recording stops when 0:00 is reached.
or ( / ) to select
CHANNEL o p
marks on
C
to resume recording.
to display 0:00:00.
so that "M" appears on
.
. The VCR will automatically
so that the "M" disappears
I[7:30] I[8:00]
Recording One Programme While Viewing Another
You can record one programme while viewing another. To
start recording, follow steps
1)
Recording the Same Programme". Then, set the TV to the
channel you want to watch.
To Monitor the Progress of Your Recording
Select the video channel on the TV.
Assemble Function
• You can record in continuation from previous programme
on a pre-recorded tape.
1) Insert a pre-recorded tape. Press
playback.
2) Press
at the desired point on the tape.
PAUSE/STILL
3) Press
. The VCR will be in the Recording Pause
REC/OTR
mode.
4) Press
( / ) to select the channel to be
CHANNEL o p
recorded.
5) Press
or
REC/OTR PAUSE/STILL
begin.
6) Press
/ when recording is completed.
STOP
L
• To check time remaining during an OTR
Press .
DISPLAY
• To change the recording length during an OTR
Press repeatedly until the desired length appears.
REC/OTR
• To stop an OTR before recording is finished
Press / .
STOP
L
• To cancel the OTR but continue recording
Press repeatedly until "I" appears without the
REC/OTR
recording length.
Auto Repeat Playback
The VCR has an auto repeat function that allows you to repeat
a tape indefinitely without touching
• Use the remote control for this procedure.
• Insert a pre-recorded tape.
1) Press .
MENU
2) Press / or /
PLAY o STOP L
/ .
F.FWD B
3) Press
/ or /
PLAY o STOP L
4) Press
/ so that "ON" appears next to "AUTO
F.FWD B
REPEAT" on the TV screen.
When in Stop mode, Auto Repeat mode will start
automatically.
If the on-screen menu still remains, press
then press / .
PLAY
o
Once you select the Auto Repeat mode, it stays in
Note: •
effect even after you turn off the VCR.
TAPE COUNTER MEMORY does not function if
•
the Auto Repeat mode is set to ON.
When you set the Auto Repeat mode to ON while the
•
Counter Memory mode is ON, the VCR exit the
Counter Memory mode automatically.
To Stop Playback
Press / .
STOP
L
To Exit the Auto Repeat Mode
Repeat steps to . Then, press
1) 3)
9
to under "Viewing and
4)
/ to start
PLAY o
. The recording will
/ .
PLAY
o
to select "SET UP", then press
to select "AUTO REPEAT".
to exit,
MENU
/ .
F.FWD
B
EN