Lcd Icons - Stanley RL HW Manual De Instrucciones

LEDs
Power LED - Blinking GREEN
• Laser Tool is Auto-Levelling
• In Calibration and / or Default Tilt Warning
Set Up
Power LED - Solid GREEN
• Auto-Levelling Complete
Power LED - Blinking RED
• Low Battery
Power LED - Solid RED
• Battery Needs Recharging
Manual LED - Blinking RED
• Manual Mode ON (Auto-Levelling OFF)
Manual LED - Blinking RED
with
Power LED - Blinking GREEN
• Out of Compensation Range
Tilt Warning LED - Solid RED
• Tilt Warning ON
Tilt Warning LED - Blinking RED
• Tilt Warning Alarm
X / Y Select LED - Solid GREEN
• X Axis Adjust Slope Mode
X / Y Select LED - Solid RED
• Y Axis Adjust Slope Mode
X / Y Select LED - Blinking GREEN
• X Axis at Maximum Allowed Slope in Slope
Mode
• X axis adjust Calibration Mode
X / Y Select LED - Blinking RED
• Y Axis at Maximum Allowed Slope in Slope
Mode
• Y axis adjust Calibration Mode
77-496 / 77-429 / 77-439 / 77-497 / 77-427

LCD Icons

Auto-Levelling Icon - Blinking
• Laser Tool is Auto-Levelling
• In Calibration and / or Default Tilt Warning
Set Up
Manual Icon - Blinking
• Manual Mode ON (Auto-Levelling OFF)
Warning Icon - Blinking
• Out of Compensation Range
• Bumped while Auto-Sloping
Tilt Icon - Solid
• Tilt Warning ON
Tilt Icon - Blinking
• Tilt Warning Alarm
Slope Icon - Solid
• Slope Mode ON
Slope Icon - Blinking
• At Maximum Allowed Slope
Calibration Icon - Solid
• Calibration Mode ON - Horizontal
Calibration Icon - Blinking
• Calibration Mode ON - Vertical
Rotation Icon with Speed Value
• Speed Setting
X / Y Icon Only - Blinking
• Adjust Shown Axis in Manual Slope and / or
Calibration Mode
X / Y Icon with Value - Value Blinking
• Adjust Shown Value in Auto-Levelling Slope
Mode
Vertical Position Icon - Solid
• Shown when Laser Tool is in Vertical Position
Battery Power - Solid
• Approximate Battery Life as Shown
Battery Power - Blinking
• Battery Needs Recharging
11