Declaration Of Conformity - Doro congress 205 Manual De Instrucciones

Connection of additional equipment
On the side of the telephone there is a socket marked 8 , this will allow additional
telephone equipment i.e. cordless, modems etc to be connected allowing access to the
telephone line.
You can reconfigure the phone ports using the switch (1:2) on the underside of the telephone (behind the
attached cover), so that the telephone port (1) and the outer port (2) are connected in parallel.

Declaration of conformity

Doro hereby declares that this product, Doro Congress 205, conforms with the
essential requirements and other relevant regulations contained in the Directive
1999/5/EC, 2002/95/CE.
A copy of the manufacturer's declaration is available at www.doro.com/dofc
Troubleshooting
Check that the telephone cord is undamaged and properly plugged in.
Disconnect any additional equipment, extension cords and other telephones. If the
problem is resolved, the fault is with other equipment.
Test the equipment on another working line. If the product works, then the fault is
probably with your line. Please inform your local telephone company.
No number shown in display when ringing
- In order for this feature to function, you must subscribe to the Caller ID service
from your network provider.
- If a text message is shown on the display, the call may be an international call (no
data received), or from a private or withheld number.
- It may not be possible to receive Caller ID information if the phone is connected
to a PBX system.
If the telephone still does not work, contact the place of purchase. Don't forget the
receipt or a copy of the invoice.
English
11