Usage / Maintenance - Quick SIGMAR BO 10 UAS Manual De Instalacion Y Uso

USAGE / MAINTENANCE

EN
USAGE
WARNING: follow the instructions of the boat engine manufacturer on how to connect engine cooling liquid to the
heat exchanger.
• Open up hot water taps of washbasins and start the water pump. This allows water to fill water heater and force air out
of the water heater and pipes. Close taps as soon as air free water comes out of the taps.
• Check that there are no leaks on pipe joints.
MAINTENANCE
During wintertime, when the water heater is not in use it should be drained using the lever of the valve. This is to avoid
serious damage caused by freezing.
The overpressure release device must be activated regularly to remove calcium deposits and to ensure that it is not
blocked.
Periodically check the joints of the water pipe installation; check the tightness of the securing screws and replace them in
case they are worn or corroded.
10
LEVER OF THE
VALVE
BOILER ARDINOX - REV001A