Descargar Imprimir esta página

Rocal D-10 Manual De Instrucciones página 21

Publicidad

Idiomas disponibles

Idiomas disponibles

E. OPTIONAL COMPLEMENTS
F. TECHNICAL CHARACTERISTICS
Parameter
Minimum- maximum flue draught.
Fire type
Fuel consumption
Flue Gas Mass Flow
Nominal efficiency
Nominal Output
Maximum output
CO concentration at 13% O2
Nominal Fuel load (test)
Re-fuel period (test)
Average flue draught (test)
Net Weight
Maximum fuel load
1. INSTALLATION GUIDE
ALL LOCAL REGULATIONS, INCLUDING THOSE REFERRING TO NATIONAL
AND EUROPEAN STANDARDS NEED TO BE COMPLIED WITH WHEN
INSTALLING THE APPLIANCE.
1.1. Fireplace room. The appliance contains fire grate, a vermiculite back, side
and base pieces and defelcted panels.
1.2. Chimney. This appliance requires a chimney to exhaust the smoke to the
outside. The diameter of this flue must be the same diameter as the outlet from
the appliance. The height of the chimney must be greater than 4000 mm from the
top of the appliance to the termination. Installation must comply with all
regulations and the flue system must not be shared with another appliance.
1.3. Wall. Before attaching the support to the wall, it is necessary that a
Professional certifying that these walls are able to bear the burden of the fireplace,
as well as indicate whether the grips plugs supplied with it, are ideal for the type of
material wall. . To tighten the screw to the wall must take into account the
information provided for fastening studs (
1.4. Insulation and safety distances. It is advisable to insulate the wall behind
the chimney and the recess (walls floor and ceiling) into which the fireplace will be
installed. These structures must not contain any combustible material (textile,
electronic, wood, glass, paper wall etc.) and the clearance for the appliance to
combustible materials must not be less than 1300 mm from the sides of the
appliances, 400 mm of the back and 400 mm of the roof, it is also obligatory floor
insulation plus a minimum distance of 200 mm from the ground to the bottom of
the appliance.
see table of characteristics of the plugs 1.7.2.).
Value
11-13 Pa
Intermitente
3 Kg./h
9,8 g/s
79%
11,5 Kw
18 Kw
0,12%
2,4 Kg
46 min
12 Pa
145,5 Kg
4 Kg
Página 21 de 36

Publicidad

loading

Productos relacionados para Rocal D-10