Technical Data - Hilti SF 18-A Manual De Instrucciones

switch, the power tool may not restart immediately when the switch is
pressed again (while the power tool is cooling down).
LEDs light constantly
-
en

4 Technical data

Right of technical changes reserved.
Power tool
Rated voltage (DC voltage)
Weight of power tool
Speed in 1st gear
Speed in 2nd gear
Torque with tool set to drilling sym-
bol (soft/flexible joint)
Torque range (15 settings)
Hammering speed when drilling in
3rd gear
Hammer drilling in masonry (max.
length 100 mm)
Keyless chuck clamping range
Drilling diameter range in wood
(soft)
Drilling diameter range in wood
(hard)
Drilling dia. range in metal
B 18/3.3
Battery
Li­Ion
Rated 21.6 V
voltage
Capacity 3.3 Ah
Energy 71.28 Wh
content
10
Printed: 22.06.2015 | Doc-Nr: PUB / 5226599 / 000 / 01
LEDs blink
LED 1, 2, 3, 4
SFH 18-A
21.6 V
2.9 kg (6.39 lb)
0...370/min
0...2,140/min
Max. 50 Nm (444 in/lbs)
2...12 Nm (12 in/lbs...108 in/lbs)
39,000/min
∅ 4...12 mm (¹⁄₈"...½")
∅ 1.5...13 mm (¹⁄₁₆" to ½")
∅ 1.5...32 mm (¹⁄₁₆" to 1¼")
∅ 1.5...20 mm (¹⁄₁₆" to ¾")
∅ 1.5...13 mm (¹⁄₁₆" to ½")
B 18/2.6 B 18/2.6
Li­Ion Li­Ion
(01) (02)
21.6 V 21.6 V
2.6 Ah 2.6 Ah
56.16 Wh 56.16 Wh
Power tool status
Power tool over-
loaded or over-
heated
B 18/5.2 B 18/1.6
Li­Ion Li­Ion
21.6 V 21.6 V
5.2 Ah 1.6 Ah
112.32 Wh 34.56 Wh