Adjusting Treble; Adjusting Loudness; Using Subwoofer Output - Pioneer DEH-P4400R Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Section
Audio Adjustments
07

Adjusting treble

You can adjust the cut-off frequency and the
Treble level.
In
and
FRT1
FRT2
affects only the front output: rear output cannot
be adjusted.
1 Press
AUDIO
Press
until
AUDIO
2 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
2K
4K
6K
10K
3 Press 5 or ∞ to adjust the treble level.
Each press of 5 or ∞ increases or decreases
the treble level.
+6
increased or decreased.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press
AUDIO
Press
until
AUDIO
2 Press 5 to turn loudness on.
Loudness level (e.g.,
display.
3 Press 2 or 3 to select the level.
Press 2 or 3 until the desired level appears in
the display.
(low)—
LOW
MID
4 Press ∞ to turn loudness off.
appears in the display.
LOUD :OFF
34
En
modes, treble adjustment
to select
.
TRE
appears in the display.
TRE
(Hz)
displayed as the level is
–6
to select
.
LOUD
appears in the display.
LOUD
:
) appears in the
LOUD
MID
(mid)—
(high)
HI

Using subwoofer output

This unit is equipped with a subwoofer output
which can be switched on or off. When a sub-
woofer is connected to the rear output, first,
switch the rear output setting to subwoofer,
then turn the subwoofer output on. For more
details, see Switching the rear output setting on
page 37.
1 Press
to select
AUDIO
When the rear output setting is subwoofer, you
can select
. Press
SUB.W
appears in the display.
2 Press 5 to turn subwoofer output on.
appears in the display. Subwoofer
SUB.W :ON
output is now on.
3 Press ∞ to turn subwoofer output off.
appears in the display. Subwoofer
SUB.W :OFF
output is now off.
.
SUB.W
until
AUDIO
SUB.W

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Deh-p4400rb

Tabla de contenido