Switch Test - Ametek JOFRA CTC-140 A Manual De Usuario

2.7

SWITCH TEST

The SWITCH TEST function (cf. Fig. 4) automatically locates the
opening/closing temperatures of a thermostat. You must enter a T
and a T -temperature which define the range within which the
max
opening/closing temperatures are expected to be found
Press
flash.
Press
Press
Press
Press
activated.
Once the opening/closing temperatures have been located, the
instrument will display the values as
temperature),
difference between the opening/closing temperatures) respectively. If
a temperature has not been found, the instrument will display
To display the three temperatures, press
Press
any time.
All manuals and user guides at all-guides.com
. The last chosen T
or to set the required T
to accept your selection.
or to set the required T
to accept your selection. The function is
(the opening temperature) and
to end the test or
7/12
.
-temperature value will
min
-temperature.
min
-temperature.
max
(the closing
or
to leave the function at
-
min
(the
.
.
ENGLISH