Menu Set - Baxtran DSC Manual De Usuario

7. MENU SET

Press and hold
screen shows the value. After all the set is over, it will automatically back out from the menu set and back to the wei-
ghing and counting mode. Press
Specific set as follows:
Nº de serie
1
2
3
4
5
6
7
8
9
10
11
24
before turning the scale on. The UNIT WEIGHT screen shows the information and the WEIGHT
for change the value and press
Pantalla
Zero
Zero tracing
Zrage
Zero range
D-rng
Dynamatic examination
Pass
Warning internal and
external limit
Point
Average filter
Spnt
Calibration mode
Speed
Sample speed
Filt
filter
Aver
Auto-averaging
A-Salt
Alarm
OLoad
Zero memory
Valor progra-
Programa de introducción
ma
0d
0 stands fro no tracing.
1d
1 stands for tracing 1d
2d
The bigger tracing vlue, the quicker back to zero
3d
0d
Quand plus grand est la valeur programmée, plus
1d
2d
rapidement retournera à zéro.
3d
0d
The bigger dynamic value is, the more stable is. But
1d
the resolution is worse and it's suitable to be used
2d
in a worse enviroment.
3d
0 0 stands for the warning internal limit presetting
1 1 stands for the warning external limit presetting
4
The bigger the filter point is, the more stable the
8
scale is. But the reaction speed is lower.
16
0 Multipoints calibration not allowed
1 Multipoints calibration mode allowed
0 Factory set
1 Fast sampling
0
1
2
3
0 Allow auto-averaging
1 Forbid auto-averaging
0 For counting
1 For weighing
0 Zero desviation correction
1 No zero desviation correction (zero memory ON)
USER'S MANUAL DSC
for go to next menu.
EN