recommended for your synthetic clothes
(such as shirts, blouses, synthetic/cotton
blended garments, etc.). For curtains and
lace, the "Synthetic 40" program with pre-
wash and anti-creasing functions selected is
recommended.
•Delicates
You can wash your delicate clothes
on this program. It has more sensitive
washing movements and does not make
intermediate spinning compared to
"Synthetic" program.
•Woolens
You can wash your machine-washable
woolen garments on this program. Wash
by selecting the proper temperature
according to the labels of your clothes.
It is recommended to use appropriate
detergents for woolens.
•Hand Wash
You can wash your woolen/delicate clothes
that bear "not machine- washable" labels
for which hand wash is recommended on
this program. It washes the laundry with
very tender washing movements without
damaging your clothes.
Additional programs
For special cases, there are also extra
programs available:
C
Additional programs may differ
according to the model of your
machine.
• Super
This program washes for a longer period
at 40°C and gives the same result as the
"Cottons 60°C" program, thus it saves
energy. It is suitable for clothes for which
you cannot use the "Cotton 60°C" program.
• Mini
This program is used to quickly wash (30
minutes) a small amount of lightly soiled
cotton garments.
Special programs
For specific applications, you can select any
of the following programs:
• Rinse
This program is used when you want to
rinse or starch separately.
• Pump + Spin
This program spins with maximum possible
rpm in the default setting after the water
drains from the machine.
C
You should use a lower spin speed
for delicate laundries.
Spin Speed selection
You can have your clothes spun at the
maximum rpm selection on your machine
by using the selection knob in models
equipped with an rpm selection knob. In
order to protect your clothes, your machine
will not spin above 800 rpm on synthetic
programs and 600 rpm on woolens
program. Furthermore, if you want to skip
the spin cycle and take your clothes out,
turn the rpm selection knob to "no spin"
position.
In machines not equipped with a spin speed
selection knob, the machine will spin in the
maximum possible rpm in the default setting
of the selected program.
6 - EN