Before The First Use - Domo DO7083S Manual De Instrucciones

Plancha con generador de vapor
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
DO7083S
inside of the handle of the iron to spray a continuous steam out of the soleplate. when
you let go of the button, you will iron dry again, without steam.
Empty water tank indicator
when the water tank is empty, the corresponding indicator will light up and there will
be a double buzzer sound. the steam generator will stop operating until the water tank
is refilled.
Descaling indicator
this light indicator will light up when the steam generator needs to be descaled. when
all scale is removed, the light will go out again.
Cord clamp
after use you can easily store the cord and steam hose by using the cord clamp. pull
out the clamp, lead the steam hose and the cord around the steam generator in the cord
winding groove and push in the clamp to lock the cord and steam hose.
Automatic shut-off
the appliance will switch itself off when there has not been sprayed steam out of the
soleplate for longer than 10 minutes.

bEFORE THE FIRST USE

1. remove any stickers or protective foil from the ceramic soleplate.
2. heat up the iron until the maximum temperature and iron on a damp cloth during
a couple of minutes to remove any possible residues from the soleplate. iron
according to the instructions in the section «steam ironing».
Caution:
During the first use it is normal that a specific odeur escapes from the appliance.
this odeur will disappear after a while.
Some particles may come out of the soleplate during the first use. This is normal.
the particles are harmless and will disappear after a while.
when turning on the appliance, the steam generator may produce a pumping
sound. this is normal. this sound indicates that water is pumped into the steam
generator.
while the soleplate is heating up, some steam will be released automatically. this
is also normal and will last for about 3 seconds.
42

Publicidad

Tabla de contenido
loading

Tabla de contenido