Grizzly Tools BHS 2670 E2 Traducción Del Manual De Instrucciones Original página 78

GB
- cleaning or servicing the appliance
or replacing any accessories,
- you have come into contact with for-
eign particles or abnormal vibration
occurs.
• Do not try to repair the appliance your-
self unless you are trained and skilled
to do so. Work not described in this in-
struction manual must only be done by
customer service centres authorised
by us.
• Do not operate the appliance near
inflammable liquids or gases. Check
that the motor and silencer are free
from deposits, leaves or lubricant at all
times. Non-compliance causes a risk
of fire or explosion.
• Put on the blade guard when carrying
or storing the appliance. Keep the ap-
pliance in a dry place and out of the
reach of children.
• Handle your appliance with care. Keep
the tools sharp and clean in order to
enhance proper and safe operation.
Take heed of the maintenance instruc-
tions. Contact our Service Centre for
spare parts.
• Caution! Notice overhead power lines.
• Handle fuel carefully, it is easily flam-
mable and the vapours are explosive.
The following points should be ob-
served.
- Never remove the tank lid while the
motor is running or hot.
- Let the motor and exhaust compo-
nents cool down before fuelling.
- Refuel outdoors only.
- Never store the hedge trimmer or
the fuel tank in a room with an open
flame, e.g. in a room with a boiler.
- If fuel overflows, do not attempt to
start the motor; instead, remove the
machine from the area contami-
nated with fuel before you start it.
- Always put the tank lid back on and
78
lock it safely after filling.
- When emptying the tank, make sure
to do this outdoors.
• If the cutting unit contacts a foreign
body or if the operating noises in-
crease or the hedge trimmer vibrates
with unusually high force, turn off the
motor and let the hedge trimmer come
to a standstill. Pull the spark plug con-
nectors from the spark plug and take
the following measures:
- check for damages;
- check for loose parts and fasten all
loose parts;
- replace damaged parts with equiva-
lent parts or have them repaired.
• Always ensure that the hedge trim-
mer is properly placed in one of the
indicated working positions before the
motor is started.
• Do not use the hedge trimmer with a
defective or strongly worn-out cutting
unit.
• To avoid risk of fire, pay attention that
the motor and sound absorber are free
from deposits, leaves or leaking lubri-
cants.
• Always ensure that all handles and
safety devices are mounted when you
use the hedge trimmer. Never try to
use an incompletely assembled hedge
trimmer or a hedge trimmer with im-
permissible modifications.
• Always use both hands when the
hedge trimmer is equipped with two
handles.
• If the hedge trimmer is taken out of op-
eration for purposes of maintenance,
inspection or storage, turn off the mo-
tor, pull the spark plug connector from
the spark plug and make absolutely
sure that all rotating parts have come
to a standstill. Let the machine cool
down before you check or adjust it,
etc.