Configuration Screen Index - FuelTech Peak and Hold PRO Manual Del Usuario

Peak and Hold PRO Injector Driver

7.1 Configuration screen index

•
"Custom" allows typing Peak and Hold current.
•
EN
•
•
•
•
10
Output Configuration: efine the channels in use and set Peak and
Hold current.
Channel: Check the boxes for the channels that are in use.
Actuation: Set the cylinder number wired to that channel.
Preset: Select Peak and Hold current from the options. Selecting
Current limits
Peak min and max: 2A/12A
Hold min and max: 0.5A/3A
Safety protections: Select the protection level desired.
Serial number: Allows selecting a serial number and call it "Driver A"
or "Driver B".
Top right panel: The buttons at the top right are for reading, writting and
ereasing the driver setup.
Information: Some info is available at this screen, such as Hardware
and software version, as well as the driver serial number.