Ecco 12+ Pro Vantage Serie Manual Del Usuario página 8

Advanced Controller (EZ1202)
Provides convenient control of the lightbar's built-in flash patterns and features soft touch buttons and LED function indicator lights.
12+ PRO ADVANCED CONTROLLER FUNCTIONS
12+ PRO ADVANCED CONTROLLER FUNCTIONS
ECCOESG.com
Cruise
Cruise
Left Alley Left Alley
[Left Cut]
Left Cut
"Power" - Press to cycle through three programmable flash pattern presets. Hold button down to shut down all functions.
Press again to resume.
Off
"Cruise" - Press to illuminate all directional modules in steady burn mode.
"Dim Mode" - Toggle press to dim standard flash patterns. Note, this mode will not dim takedown, alley and worklights.
Long-press this button for two seconds to activate or deactivate backlighting on the contrl head.
No Functionality
"Flash Pattern Select" - First, select Pattern 1, 2 or 3 to program by pushing the Power Button.
Toggle Press /
Toggle Press
Dim
DIM Take Down Takedown
Back Lighting
[Back Lighting] Front Cut [Front Cut]
Safety Director
Safety Director
On/Off
On/Off
Pattern 1 Pattern 2
Next, double press to enter flash pattern select mode and cycle one flash pattern. The 4 corner
LEDs on the controller will mimic the lightbar to give pattern feedback. Press again once to cycle
to the next flash pattern. Press and hold for 3 seconds to return to the prior flash pattern. The
lightbar will store the last flash pattern used to the active preset. After 30 seconds of inactivity
in Select mode, the control head will automatically exit Select mode.
Press for 2 Seconds
[Press for 2 Seconds]
Select
Select
No
No Functionality Progrom Flash
Program
Functionality
Patterns
Flash Patterns
Work Light Safety Director
Work Light Safety Director
[Rear Cut] Pattern Select
Rear Cut Pattern Select
Pattern 3
P/N EZ1202
Flash Pattern 1
Flash Pattern 1
Flash Pattern 2
Flash Pattern 2
Flash Pattern 3 Flash Pattern 3
Right Alley
Right Alley
[Right Cut]
Right Cut
Page 8 of 14