Steinbach APPcontrol Manual Original página 43

Autostart mode
The Autostart mode lets you configure the autostart function.
F
2
3
4
5
6
7
8
Connection status
See "Start menu".
Start menu
2
Return to the start menu.
Autostart mode
3
Selects autostart mode.
- Single cleaning starts the cleaning process once after the set delay.
- Periodical cleaning starts the cleaning process immediately and repeats it at the
same time at the set interval.
Delay/Interval
4
Depending on the autostart mode, the selection field alternates between hours and days.
- Single cleaning defines the delay until cleaning starts (1 to 23 hours).
- Periodical cleaning defines the interval of periodical cleaning (1 to 10 days).
Confirm
5
Transmits the settings to the control unit.
Delete
6
Deletes the settings in the control unit.
1
1
1
2
3
4
5
6
7
8
43