Miscellaneous; Error Messages - Medisana FTD Instrucciones De Manejo

3 Measuring Procedure / 4 Miscellaneous
>
7. The device will then automatically go into time and ambient
temperature mode (if the time was programmed) or switches off.
8. If the measured temperature is outside the permitted range, "Lo"
or Hi" will be displayed.

4 Miscellaneous

4.1 Error messages

Display
>
Cause
The temperature
measured is higher
than
43°C (109.4°F)
The temperature
measured is lower
than
34°C (93.2°F)
The operating
temperature is
not in the range
15°C~35°C
(59°F~95°F)
>
Solution
Operate the thermometer
only between the
specified temperature
ranges.
If necessary, clean the
sensor tip. In the event
of a repeated error
message, contact your
retailer or Customer
Services.
Operate the thermometer
only between the
specified temperature
ranges.
GB
19