User Warnings - Cuppone Silea Guia De Inicio Rapido

Avvertenze di sicurezza
Sicherheitshinweise
EN
Symbols used in the manual and
on the labels applied to the machine
Indicates that caution is required when performing
an operation described in a paragraph that bears this
symbol. The symbol also indicates that maximum
operator awareness is required in order to avoid
unwanted or dangerous consequences
Reference to another chapter where the subject is
dealt with in more detail.
Manufacturer's tip
Indicates that the surfaces marked with this symbol
may be hot and must therefore be touched carefully
Dangerous voltage
The symbol identifies the terminals which, connected
to each other, carry the various parts of a device or
system to the same potential (not necessarily the earth
potential)
Indicates that it is necessary to read carefully the
paragraph marked with this symbol before installing,
using and maintaining the equipment
Installer warnings
• Read this guide carefully before installing the
appliance, and keep it with care in an accessible
place for any future consultation by the various
operators.
• Moreover, the manual must always accompany
the product through its life, even in case of transfer.
• Before any movement or installation, check
that the room is suitable and systems comply
with the installation country standards and the
specifications indicated on the appliance rating
plate.
• All installation, assembly and non-routine
maintenance operations must be performed
exclusively by qualified technicians that are
authorised by the Manufacturer, in compliance
with the regulations in force in the user country,
and with the regulations on systems and work
safety.
• Before performing
maintenance, disconnect the electricity supply.
• Unauthorised actions, tampering or modifications
Safety instructions
Advertencias de seguridad
any installation or
Consignes de sécurité
Предупреждения по безопасности
that do not follow the information provided in
this manual can cause damages, injuries or fatal
accidents and null and void the warranty.
• It is forbidden to install the product in
environments at risk of explosion.
• Installation or maintenance that fails to comply
with the instructions in this manual may cause
damage, injury or fatal accidents.
• Do not obstruct the ventilation and exhaust holes
of this or other equipment.
• Persons not involved with the appliance
installation may not pass through or stand in the
work area during appliance assembly.
• The serial plate provides important technical
information. This is vital in case of a request for
maintenance or repair of the equipment: please
do not remove, damage or modify it.
• These appliances are intended to be used for
commercial applications, for example in restaurant
kitchens, canteens, hospitals and commercial
companies such as bakeries, butcher shops, etc.,
but not for the continuous and mass production
of food.
• To avoid risks, if the power cable is damaged, it
must be replaced by the Retailer, its service agent
or qualified personnel.
• Failure to follow these regulations may cause
damage or even fatal injury, subsequently
invalidating the guarantee and relieving the
Manufacturer of all liability.

User warnings

• Read this guide carefully before using and
maintaining the appliance, and keep it with care
in an accessible place for any future consultation
by the various operators.
• Moreover, the manual must always accompany
the product through its life, even in case of
transfer.
• Before performing any maintenance, disconnect
the electricity supply.
• Unauthorised actions, tampering or modifications
that do not follow the information provided in
this manual can cause damages, injuries or fatal
accidents and null and void the warranty.
• Use or maintenance that fail to comply with the
instructions in this manual may cause damage,
injury or fatal accidents.
6