Required Tools - MRA 11.017.XCN Manual De Instrucciones

Read this manual carefully and check the parts list for completeness before you begin. We recommend that you have
Parts List:

1x MRA-Screen

1 x Mounting kit

1 x Set of bolts
P1
P3
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at regular intervals.
Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or spirits to clean the screen as
MRA-Klement GmbH + Siemens Str. 6 + D-79331 Teningen
Thank you for buying a MRA Windshield.
your screen fitted by an authorised workshop.
P4
they will damage it.
I N S T A L L A T I O N M A N U A L
T i g e r 8 0 0 ( C X )
Tel.: +49 7663 9389 0 + Email: info@mra.de

Required Tools:


Torx 30T

Allen key 5mm

Wrench 8mm

Socket wrench 8mm
P2
© by MRA-Klement GmbH – 08/2011