Troubleshooting - geberit 116.086.00.1 Operación Manual

EN

Troubleshooting

Malfunction
No flush actuation
Incorrect flushes (too
soon, too late, unwanted)
Flushing out of the urinal
ceramic is inadequate.
Water is splashing out
from the urinal ceramic.
Residual water in urinal
ceramic appliance is not
draining
14
Cause
Network failure (green LED on
power supply unit does not light up)
Water supply valve closed
Technical fault
Unsatisfactory user recognition due
to urine scale deposits in the urinal
trap
Technical fault
Flush time set incorrectly
Basket filter in solenoid valve
blocked
Water pressure too low
Flow rate too high
Urinal trap or discharge pipe
clogged
Action
▶ Check the power
supply.
▶ Open the water supply
valve.
▶ Contact a skilled
person.
▶ Clean the urinal trap.
→ See "Cleaning the
urinal trap", page 15.
▶ Contact a skilled
person.
▶ Set flush time. → See
"Setting the flush time",
page 15.
▶ Contact a skilled
person.
▶ Contact a skilled
person.
▶ Contact a skilled
person.
▶ Contact a skilled
person.
9007206873298955-1 © 04-2021
970.154.00.0(00)