Parts And Features; Use - Vitamix ONE VM0217 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4.
3.
5.
6
p
f
a r t S a n d
1.
Motor Base
2. Variable Speed Dial
3. Container
4. 2-part Lid Assembly
5. Tamper
Container Compatibility - The container included in your Vitamix ONE blender is the only Vitamix container that will
work on this motor base.
Off (O) - when the indicator on the Variable Speed Dial is aligned with "O", the blender is off. By rotating the dial
clockwise (to the right) and away from O, you will increase the blade speed.
Variable Speed Dial - The Variable Speed Dial let's you control blade speed from Low to High.
Tip: Follow the instructions in the recipe you are using for best results.
The Variable Speed Dial stops in three places:
1.
O (Off)
2.
Low (the blades start to spin)
and
3.
High
1.
Motor - The motor is designed to protect itself from overheating. If the blender will not start immediately, check to make
sure you have plugged the unit in. If the motor has overheated, allow the motor to cool for 20-45 minutes.
2.
Tips to prevent 'overloading' your blender:
Process only Vitamix recipes when learning to use the blender. Do not process recipes at lower speeds than
recommended. Do not process recipes at higher speeds than recommended.
Do not process recipes for longer than recommended.
DO NOT continuously use the blender for more than 3 minutes.
Use your tamper to process thicker mixtures and keep ingredients moving around and through the blades.
Tamper -
Lids and tampers are not interchangeable between different container styles, types and sizes. Use the tamper
that was supplied with your blender.
The container should not be more than two-thirds full when the tamper is used during blending.
To avoid overheating, DO NOT use the tamper for more than 30 consecutive seconds.
e at u r e S

Publicidad

Tabla de contenido
loading

Tabla de contenido