SOUNDMASTER high line TR100 Manual Del Usuario página 18

USB/SD OPERATION
1. Slide the Power ON/OFF switch to ON position to turn on the
unit.
2. Connect your USB device or SD/MMC card to the unit to
access "USB" or "CARD" mode, the relevant "USB" or "CARD"
icon appears on the display. The USB or SD/MMC card will start
playing automatically once the contents scanning is finished.
-Press "PLAY/PAUSE" button to pause or resume playback.
-Press "VOL+" or "VOL-" button to raise up/lower the volume
level.
-Press " " button to skip to next track or press "
to the previous track.
-Press and hold "
desired music.
-Press "RPT/MEM" button to change the Repeat mode in the
following cyclical manner:
Repeat All (default repeat mode)
- To remove your USB device or SD/MMC card, simply stop
the playback and gently unplug it from the connector.
AUX-IN (LINE IN) OPERATION
If you are using an iPod or other MP3/digital audio player which
can not plug in this unit directly, you can still play it on the unit
via an audio connecting cable.
1.Plug one end of the 3.5mm audio cable (excluded) into the
headphone or line out jack on your player, plug the other end of
cable into the unit AUX-IN jack of the unit.
" or " " button to search during the
→
7
→
Repeat-1 Repeat older
" button