Troubleshooting - HumanTechnik earis Instrucciones De Servicio

Troubleshooting

Symptoms
Charging status LEDs
do not light up, de-
spite batteries insert-
ed in the transmitter
charging stations.
Charging status LED
does not light up, de-
spite a battery being
inserted.
Charging status LED
for the receiver does
not light up, despite
the receiver being put
in the charging dock.
The receiver does not
work, no sound trans-
mission.
The receiver does not
work, no sound trans-
mission.
Cause
The transmitter is with-
out power from the
power supply unit.
No contact between
battery and charging
station in the transmit-
ter.
No contact between
the receiver battery
and the charging dock
of the transmitter.
No battery placed in
the receiver.
The transmitter is not
properly connected to
the TV- or stereo set.
The TV- or stereo set is
not switched on or the
output has not been
configured properly.
The pairing has been
lost
The receiver is not
switched on.
(Pocket Version)
Solution
Check that the power
supply unit is properly
connected and that
the mains electricity
outlet is working prop-
erly.
Insert the batteries
correctly and com-
pletely into the trans-
mitter.
Check if the contact
areas are clean.
Make sure that the
receiver is correctly
placed in the charging
dock.
Insert the battery in the
receiver.
Check the cables and
connectors between
the transmitter and the
audio source.
Switch the
source on or check the
settings.
Pair the transmitter
and the receiver again.
Switch the receiver
on, using the ON/OFF
switch on the side of
the device.
(Pocket Version)
English 45
audio